How To Stop Automatic Repair On Laptop Windows 10

On Windows 10, automated repair is a handy feature that troubleshoots and fixes common bug that may exist preventing your device from loading correctly.

If your computer fails to starting time two consecutive times, in the third boot the self-repair machinery will trigger, and during this process, the system will run a number of diagnostic tests to observe and repair common startup problems.

However, if you would rather troubleshoot and fix startup problems manually, or the automatic repair is causing unexpected loops, it'southward possible to disable the feature on Windows 10.

In this Windows ten guide, we walk you through the steps to disable automatic diagnose and repair on your device. In addition, if automatic repair was previously disabled, or you lot want to revert the changes, nosotros likewise outline the steps to re-enable the feature.

How to disable automatic repair on Windows 10
How to enable automatic repair on Windows x

How to disable automatic repair on Windows 10

To disable automated repair during the tertiary unsuccessful boot of Windows 10, utilize these steps:

Open Get-go.
Search for Control Prompt, correct-click the pinnacle result, and select Run as administrator.
Blazon the following command and press Enter:

bcdedit
Make note of the reoveryenabled and identifier values under the "Windows Kicking Loader" section. The values should be similar to these:
- identifier: {current}
- recoveryenabled: yes
Type the post-obit command to disable automatic repair and printing Enter:

bcdedit /set {electric current} recoveryenabled no
- In the command, we're using {current} to specify the target OS pick in the boot loader and the no value to disable the automated repair.

In one case you complete these steps, the diagnostic and repair feature will no longer run automatically after the third unsuccessful kick of your device.

How to enable automatic repair on Windows 10

If the automatic repair feature is disabled, you can use these steps to re-enable it:

Open Outset.
Search for Command Prompt, right-click the top event, and select Run as administrator.
Type the post-obit command and press Enter:

bcdedit
Brand note of the reoveryenabled and identifier values under the "Windows Boot Loader" section. The values should be similar to these:
- identifier: {current}
- recoveryenabled: no
Blazon the following command to enable automatic repair and printing Enter:

bcdedit /gear up {electric current} recoveryenabled yes

In the command, we're using {current} to specify the target Bone selection in the boot loader and the yeah value to enable automatic repair again.

After completing these steps, if yous're having problems starting Windows x, as you lot try to boot your device a third time, the organisation will go on to diagnose your device, and information technology'll endeavor to repair common problems that may prevent the OS from loading correctly.